Multi-layer woodboard
Multi-layer wood board, multi-layer panels or simply multi-layer board can refer to a variety of engineered wood products, depending on location and the manufacturer. However in general it is a board product made up of 3 or more 3 layers of material, with each layer often being solid wood and slightly thicker than that found in plywood, normally around 3-6mm and the layer can vary in thickness. The term may however be used to refer to any type of engineered and layered board product, it might also be used to refer to a thick type plywood board that has more than five layers at the same thickness, although this is often called multiplex board.
In general multi-layer wood boards are normally timber-based sheet materials that comprise of multiple layers of similar thickness timber, glued under high pressure, with the grain of each layer laid at 90 degrees to the previous. The wooden layers tend to be solid wood, although because they are relatively thick (in comparison to plywood or veneers) a few examples of such products might comprise of layered composite wood products.
[edit] Uses
In general multi-layer board is slightly stronger than similar products such as blockboard, coreboard or laminboard and as such can be used in flooring solutions and general construction. It is also used in furniture production, indoor wall cladding and so on, normally mostly interior use due to the specification of glues.
[edit] Working
Multi-layer board can be worked with standard tools, easily sawn, good screw and nail-holding properties, and because of its greater improved rigidity and strength, has some spanning capability, such as between joists. It is not as strong or hard wearing as multiple layer plywood products (multiplex) because it tends to be softwood based, with thicker layers, therefore less dense and with less glue, it does however tend to be lighter.
[edit] Related articles on Designing Buildings
- Adhesives.
- Cedar.
- Chipboard.
- Confederation of Timber Industries.
- Cross-laminated timber.
- Engineered bamboo.
- Engineered wood products EWP.
- Glulam.
- Laminated veneer lumber LVL.
- Lime wood.
- Medium density fibreboard - MDF
- Modified wood.
- Oriented strand board.
- Plywood.
- Softwood.
- Timber.
- Timber construction for London.
- Timber preservation.
- Timber vs wood.
- Types of timber.
Featured articles and news
Licensing construction; looking back to look forward
Voluntary to required contractors (licensing) schemes.
A contractor discusses the Building Safety Act
A brief to the point look at changes that have occurred.
CIOB Construction Manager of the Year award
Shortlist set to go head-to-head for prestigious industry title.
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.